Important Ways to Prevent Condensation and Damp in Your Home
Damp and built-up condensation in your home can cause terrible problems that are expensive to repair. They can cause damage to your house, as well as begin to affect your health. So taking precautions to avoid them is essential if you don’t want to have to deal with them later down the line. There are a number of ways that you can prevent damp, mold and condensation in your home. Many of them are simple and require barely any effort at all, such as reducing the amount of moisture you produce inside and making sure rooms are well-ventilated. Try these tips to avoid the buildup of moisture in your home creating problems for you.
Produce Less Moisture
One way to stop condensation building up is to try and limit the amount of water in the air. Many of the ways you can do this are just simple alterations to your behavior. You can remember to put lids on pans when you’re cooking, try not to dry clothes indoors and ventilate your dryer. Don’t take extremely steamy showers if you can, especially when your bathroom doesn’t have an extractor fan. You can also avoid using paraffin heaters and flueless bottled gas heaters since these produce a lot of moisture.
Circulating the moist air outside, and fresh air inside is vital for preventing condensation and mold in your home. Sometimes it’s as simple as throwing open the windows now and then, especially during the winter. You can also have extractor fans fitted if your home doesn’t already have them, as they’re very efficient. To stop moist air circulating through the house, keep doors closed when you’re cooking or bathing. You can also reduce the humidity in the air using one of the best dehumidifier products on the market. Dehumidifiers are particularly useful for bedrooms to make your sleeping environment more comfortable.
You can reduce condensation in your home by making sure that it’s warm. Insulation is one of the best ways to create a warmer house, and it will help you to save money too. You should insulate your roof cavity or attic and cavity walls. It’s also essential to check for any drafts that could be coming in through windows and doors.
Turn the Heating Up
If you have insulated your home and it’s still cold, turning the heating up could help. You don’t want to waste money and energy on heating you don’t need, but freezing rooms are more likely to suffer damp and mold. You don’t need to put the heating on full blast in unused rooms, but you can put it on a very low setting so that they receive some heat when you turn it on.
Remember that condensation isn’t the only thing that can cause damp. It could also be the result of a leak in the roof, blocked guttering, and more. You should keep an eye out for any of these causes too. Make sure that you keep your home well-maintained to prevent these problems.